MAKE YOUR OWN (18+) - Mora Companion Leather Sheath Kit - Knife Not Included (45-2000)

Make Your Own Leather Sheath Kit  45-2000

PLEASE NOTE: - This kit does NOT contain either of the Mora Companion Knives, but does contain a solvent based glue, as such you must be 18 years or above to purchase this product.

• FREE UK Delivery 
• The Kit Contains:
• Natural Russett Leather pre-cut Sheath
• Pre punched stitching holes & markings
• Thick Leather Welt
• Measures: Approx 53mm x 215mm
• Friction Fit
• High Ride
• Artifical Sinew or Tiger Thread (See drop down menu)
• Needle
• Tube of Contact Adhesive
• Leather Scratching Awl
• Sand paper
• Video Instuctions: See link below
• NOT Suitable for Under 18 Years

PLEASE NOTE: - This particular Kit does not include either of the Mora Companion Knives however it does supply a solvent based glue, so it is NOT suitable for sale to anyone under the age of 18 years.

This is just the leather Sheath kit on its own. Ideal for those who already have a Mora Companion Knife. This Leather Kit allows you to make a genuine Beaver Bushcraft (Shark Designs) Mora Companion high ride, friction fit, leather sheath. This sheath has been specifically designed to fit all the knives in the Mora Companion Series (ie the old Mora Clipper range). Full video instructions explain the simple process.

The Kits contains a high quality 3.5 (+/-)mm veg tanned leather pre-cut out sheath with pre punched stitching holes and assembly markings. Plus a thick leather welt, with pre punched holes. The Welt is an essential assembly component to any good quality sheath. It is designed to protect the sheath’s stitching from the blade as well as protecting the blades cutting edge whilst sheathed. The leather has been left as natural as possible. We have left it up to the individual if they wish to keep the sheath natural and over time the leather will patina down or it can be hand dyed or tooled, we will leave it up to you.

There is a choice of Artificial Sinew or Brown Tiger thread (see drop down menu option) with a good quality sewing needle for cross stitching Plus we have included a tube of strong contact adhesive for bonding the welt and two sides of the sheath together before stitching. Also included is an Awl for realigning and expanding the holes thus allowing the needle to pass though more easily .A piece of sand paper has also been included for smoothing out the leather edge of the welt once it has been glued and before stitching.

The basic tools for assemble have all been included in the Kit however we have suggested some extra tools that may aid the assembly: a pair of pliers, a pair of scissors and a lighter to seal the tread ends.

IMPORTANT INFORMATION: It is illegal to sell Knives or glue to anyone under the age of 18 years old. There will be circumstances where ID has to be provided for so that we can check proof of your DOB. Please do not be offended when we ask for this as we are only complying with the law.

 Beaver Bushcraft Leathercraft Kits Assembly Videos

Part 1 - Introduction

Part 2 - Stitching the Belt Loop

Part 3 - Gluing Up the Sheath

Part 4 - Sanding the Sheath Edge

Part 5 - Cross Stitching the Sheath

Part 6 - Locking the Thread

Part 7 - Suggestions - How You Could Finish the Sheath