Hand Crafted Roman Inspired Drinking Bottle - Medium
FREE UK Delivery
Beautifully Hand Crafted in the UK
Handmade Leather Roman Styled Bottle/Flask
Made Using Traditional Techniques & Methods
Made Using High Quality Vegetable Tanned Leather
Hand Dyed: Hazel Brown
Lined With Brewers Pitch/100% Natural Bees Wax
Hand Made Stopper
Stopper Secured with Leather Thronging
Holds (approx.): 500ml
Measures (approx.): 240mm x 180mm
Ideal for Re-enactors, Bushcraft and Survival Enthusiasts
Cosplay, Larp, Filmprops
Although this handmade leather Bottle is a piece of Art, it can still a practical working object and can be used as it was intended. Each of our Leather Bottles/Flasks are all hand cut from the very best quality vegetable tanned leather, then stitched and individually wet moulded before it is carefully lined and sealed with Traditional Brewers Pitch ( or in some cases we have had to use 100% natural bees wax, ready for use. It is advised that if you are going to use these Bottles for wine, beer, cider, sprits etc it is essential that you rinse the Leather Bottles/Flasks out throughly several times before use to get rid of the bees wax taste. Please allow 1 week from when you place your Order as each Bottle has to be carfeully checked before despatch.
Individual Shape & Character
Our handmade Leather Drinking Bottles have been made using traditional techniques and methods that have been used for thousands of years - a concept that has stood the test of time. Since each bottle is made as an exclusive item, each bottle will have taken its own individual journey during the making that defined its uniqueness with regard to shape, colour and feel. Each Leather Bottle Flask will slightly vary as each one is handmade. The leather thonging can be adjusted so you can carrying the Bottle accross your back, over your shoulder, high or low.
We could have easily made our Leather Bottles/Flasks so that they all looked and felt exactly the same, by simply moulding them around a standard bottle shaped Wooden Block Former before assembly. However, that manufacturing technique would have created a style of bottle that would have lacked the individual character and originality that we were looking for. Certainly wet moulding leather around a wooden former, before assembly, requires a lot less effort than wet moulding them after assembly as in the method that we employed.
Since we decided to approach the production of them from a more organic direction, creating them as individual and uniquely shaped items, it required that we mould them with dry sand. Sand moulding the bottles allows us to listen and feel the leather during the stretching process and thus do what the leather requires rather than forcing a required shape upon it. Because leather is an organic natural material it has its own distinct character, the shape it takes on is, you might say, built into the qualities of the leather and are teased into existence by us. During the waxing process the leather’s unique qualities, imperfections and markings, allow it to take on its own extraordinary colours, incorporating subtle shades and hews that define the qualities of the finished product making it quite unique.
Leaking and Damage Repairs
All of our Leather Bottles/Flasks have been made to the very highest of standards and are check for leaks before they are sent to our customers, however, over time the bottle may be knocked or damaged in some way, which may result in it springing a leak. If leaking does occur it will usually occur at the stitched seams which can be easily fixed or plugged by pressing a small amount of softened Beeswax into the affected area with a smooth pointed stick and then rubbing it down smooth with a cloth.
Or you can melt Beeswax in a suitable container over a Bain Marie (water bath) – never heat beeswax over a naked flame as this can overheat the wax which can then spontaneously combust - and apply the melted beeswax to the damaged area. If the bottle’s shape has been compromised by crushing it can usually be blown back into shape before the beeswax is applied. Heating the bottle in an oven set to about 70 degrees Centigrade (158 degrees Fahrenheit) will allow the beeswax to melt and become hot enough to re-level within the fibres of the leathers, but will not be too hot to cook the leather and damage its structure. Allow the bottle to cool before handling it. Remove any excess bees’ wax that was not absorbed into the leather by gently scraping it off with a spoon. The surface can be further refined by applying pure Gum Turpentine to a cloth and rubbing off the wax, when dry, polish the surface with a dry cloth.
We offer this service should you require your water bottle to be professionally relined. Please Contact Us for more information should you require this service.
Do & Don’t of Leather Bottles
Do sterilise the bottle after each use with a mild sterilising solution suitable for food containers such as Milton fluid. Thoroughly rinse after sterilising.
Do rinse the bottle before each filling.
Do allow the bottle to drain upside down after rinsing to allow the bottles interior to thoroughly dry out after use.
Do give the bottle an occasional polish with some standard shoe polish to help prevent aging and cracking – outside of bottle only and only on non-hairy bottles!!!
The Do Not’s:
WARNING: NEVER fill the Leather Bottles with hot liquids, or food stuffs and/or leave by anything hot such as fires, radiators or in a car on a hot sunny days etcetera, as this can melt the wax causing the bottle shape to become distorted, as well as cook the leather causing irreparable damage and shrinkage and may also cause the bottle to leak.
Do not fill the bottle with etremely strong alcoholic based spirita as these products will cause damage to the Brewers Pitch Lining. Weaker alcoholic beverages such as beers, ciders and wines MAY damage the Brewers Pitch Lining over time.
Do not fill the bottle with oils such as Olive oil as this can soften the beeswax and compromise the integrity of the bottle.
Do not drop the bottle as this can cause the Brewers Pitch to crack and could also dent the bottle at the point of impact. The damaged area may then be prone to leaking.
Do not use detergents or any other cleaning agents inside this bottle.
Do not wash this bottle in a Dishwasher.
Do not store water in leather water bottles for extended periods of time; this could cause bacteria and moulds to grow inside the bottle.
Do not store the empty bottle with the bung in place as this could cause bacteria or mould to grow inside the bottle.
Do not store the bottle in confined or airtight containers as this could cause bacteria or mould to grow on the bottle.
Although these Leather Bottles are a fully functional items and are made to the very highest standards using natural materials such as Brewers Pitch and natural veg tanned leather, and they have been made using tried and tested techniques based on historical methods and designs. We have to state, that under European guideline these bottles are not suitable for use as a drinking bottle and should be considered a decorative item only, we will leave it to our customers to decide what they use our Bottles for! Please note no other accessories are included in the sale of this Bottle, any objects seen in the photos are for display only.